•     Over 250 years of quality service

  •     Freepost on orders over £100

  •     Traditional Values, 21st Century Service

GRS

Items 1 to 30 of 120 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  • GRS ACROBAT VERSA STAND & LEICA A60 MICROSCOPE COMPLETE PACK

    The GRS Acrobat Versa Stand has been trusted by hand engravers and jewellers for years and has been redesigned with a sleek form specifically for the high-powered Leica A60 microscope. The new Acrobat Versa features a rigid frame that makes positioning easy, a magnetic document holder, and ergonomic handles for the best optical experience possible.

    This item will have to be sent via UK Mail Hazardous Materials & Liquids Only

  • GRS GRAVERMACH AT WITHOUT HANDPIECES

    Never before has a pneumatic handpiece system given the user so much versatility and control. A remarkable technical breakthrough is the seamless combination of hand and foot control. Using one simple knob, the user can choose between hand or foot control, whenever desired. This allows optimal working comfort and precision in a wider range of creative jobs. The new GraverMach AT is wonderfully familiar to anyone who uses its predecessors such as the GraverMax, GraverMax SC, or the original GraverMach. With the expanded capability of precise, selectable hand control, this new power tool is in a class by itself. The hand control technology is based on the GRS Airtact. This advanced (patented) air logic system provides hand power control without adding moving parts to the handpiece itself. The result is a rugged and intuitive way to control handpiece power by hand. When foot control is preferred, it is only seconds away. Just one simple selector knob instantly provides greater control, choice, and refinement while working. The ability to instantly change from hand to foot control, as desired, means new creative freedom and reduced stress. Supplied without handpieces or compressed air supply - requires 6mm compressor tubing and 40 liters per minute at 3 bar minimum. Warranty - 3 Years UK’s Official Distributor This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • GRS MEIJI MICROSCOPE

    Imagine seeing twenty times better than any time in your life. Instantly, you do finer work. Magnified up to 22.5x, you see clearly what your hands and tools are doing. No longer will your eyes limit your engraving, stone-setting, jewellery making or other work. Your finished work now exhibits the striking beauty and precision you've strived for. Looking through this microscope, jewellers set every stone perfectly the first time... even intricate settings with tiny stones. Fragile or odd-shaped stones are easy to mount with far less risk of breaking. Many jewellers use this microscope to make more money by routinely doing jobs they previously avoided. Engravers add the finest details to bring their work alive. No patterns are too small or complex. Pieces engraved under this microscope are recognized as higher level work by ordinary people and qualified judges. Beginners and master engravers are amazed and delighted that their present skills produce such beautiful work just by using the microscope. Imagine no eye strain - hour after hour, your eyes stay fresh and sharp. Includes stereo zoom microscope body, 0.5 objective lens. Other magnifications and working distances available. Magnification Range: 3.5 to 22.5 Working distance: 6" (150mm). This item will have to be sent via UK Mail Hazardous Materials & Liquids Only This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • GRS GRAVERMAX G8 WITHOUT HANDPIECE

    This engraving system gives each handpiece excellent range of power with perfect control throughout an expanded range of impact speeds. The GraverMax G8 features 400-8000 strokes per minute, a throttled bias adjustment valve for tailoring throttle response and a dual stage precision air regulator. Advanced ergonomics include front air pressure adjustment, Quick Connect air couplings, rear mount throttle connection and an advanced valve pulse unit that operates with virtually no noise or vibration. The GraverMax G8 has connections for two impact handpieces and an auxiliary air connection for other air tools, including the GRS ULTRA 850 Rotary handpiece. All handpieces and tools are sold separately. Warranty - 3 Years UK’s Official Distributor This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • GRAVER HONE VS COMPLETE APEX SHARPENING SYSTEM

    GraverHone VS features: • Variable speed (400-900 RPM) • Dual direction • Top quality motor and components • Direct drive system • Top surface qualified parallel to the spindle and drive plate • Time-saving quick lock for diamond wheels (no threads) • Design matching the GRS Air Systems Apex Sharpening System features: • Colour-coded dials with storage rack • Speedline dials for easy step-by-step sharpening • Dual Angle dial for unlimited graver geometries • New longer post with increased magnetism • Updated compact profile • Steel locking screws • Works exclusively with GRS QC Tool Holders • ¼ turn graver lock • Simplified post dial
  • GRAVER HONE VS COMPLETE DUAL ANGLE SHARPENING SYSTEM

    Quickly and easily grind, sharpen and polish carbide or HSS gravers with the GraverHone VS. This variable speed hone features high torque with a unique motor, guaranteeing the highest quality and durability. Each spindle and drive plate are individually qualified parallel to the top surface of each Graver-Hone. This extra step in the manufacturing process ensures that each unit is in proper alignment for even, repeatable grinds every time. The Dual Angle Sharpening Fixture included in this package is the perfect solution for producing any graver geometry desired. The GraverHone VS and the GRS Sharpening Fixture, now an industry standard, make the perfect team.
  • GRS GRAVERSMITH WITHOUT HANDPIECE

    This new power tool offers basic work capability and pneumatic impact power for stone setting and engraving. It is ideal for production stone setters, multiple factory installations, and individual craftsmen on a budget. Like all GRS power tools, it reduces user fatigue, increases production, and improves quality. A choice of Standard Handpieces allows the GraverSmith to fit a wide range of applications. UK’s Official Distributor This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • GRAVER HONE VS

    Quickly and easily grind, sharpen and polish carbide or HSS gravers with the GraverHone VS. This variable speed hone features high torque with a unique motor, guaranteeing the highest quality and durability. Each spindle and drive plate are individually qualified parallel to the top surface of each Graver-Hone. This extra step in the manufacturing process ensures that each unit is in proper alignment for even, repeatable grinds every time.
  • GRS MAGNABLOCK

    The MagnaBlock provides additional stability while using power tools, chasing hammers, and similar equipment. A massive ball-and-roller bearing system allows smooth rotation without wear or looseness. The internal rotational brake system allows the user to easily adjust rotational resistance. Machined from solid stainless steel with a satin finish and black jaws to reduce glare and eye strain. This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • GRS LOW PROFILE VICE

    Find just the right working height under a microscope with this vise. When a workpiece calls for a lower height, the Low Profile Vise provides a comfortable 6” (150mm) of space for a proper view and position. This vise has the same jaw size and capacity as the Magnablock, yet is 1.5” shorter. Top half of vise rotates while bottom half remains stationary Includes upper jaw plates, 5 pins, base, 1 plastic hex key, and wrench. This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • GRS Engravers Block 30 Accessories

    The GRS Engravers Clock is 25% heavier than other blocks and inside there is a double ball bearing system for smooth rotation and a break that allows you to control the resistance. Ball diameter: 130mm, jaw width: 64mm. Includes 30 piece attachment set. This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • GRS Basic Power Hone

    GRS standard graver sharpening system. Just need a simple set up for a sharpening station? Even users who prefer sharpening by hand will have less fatigue and spend less time than using a traditional stone or wheel. This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • GRS Acrobat Microscope Stand

    Gives outstanding flexibility when positioning your microscope. Easily positioned stays in place and swings away when not required. Fixes easily to the back of any standard bench This innovative GRS Acrobat Stand is a truly flexible solution for the EMZ-5 Acrobat Microscope .Quickly adjust vertically and horizontally to a variety of workholding situations, or swing the Acrobat Stand to either side when not in use. Set the arm resistance as desired or lock it in position. The built-in headrest reduces neck and back strain. This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • GRS Benchmate Encore QCX Setters Pack

    This is the new Benchmate workholding range - the Benchmate Encore. The Classic range is still available but the Encore now offers an improved range of articulation and a reversible handrest for both left and right handed users. This top of the range model - the Encore QCX - has an even greater range of articulation than the Encore QC - with it's jointed support arm and screw collars which allow vertical movement of the vice head for working with a microscope, for example. The Setter's Package includes the outside ring holder plus vertical and horizontal inside ring holders,4 extra plastic jaws, hex keys for adjustment plus the benchpin kit, fixed mounting plate and fixing screws.
  • GRS Ultra 850 Handpiece only

    The GRS Ultra 850 rotary handpiece turns between 300,000 and 400,000 RPM for effortless engraving, decorating and grinding of metal, shell, plastic, glass, stone, wood and almost any material. Due to its extremely high speed, the Ultra 850 accepts only 1/16" diameter (1.6mm) bur shanks. This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • AIRTACT CONTROL SYSTEM FOR GRAVERMAX

    This is an add-on to the Gravermax and Gravermach. The Airtact enables the user to make use of the palm and finger touch control giving more feeling and adjustability than the standard foot pedal.
  • GRS MAGNUM AIRTACT HANDPIECE - STAINLESS STEEL

    Magnum Handpiece with built in Airtact control for use with the Gravermach AT.
  • GRS AIRTACT MONARCH HANDPIECE

    The GRS QC Airtact Monarch Handpiece provides the controllability to achieve ultrafine Microsetting, engraving and accurate detailing – The Quick Change (QC) function allows gravers to be quickly change to suit the engraving situation. The heat treated Stainless Steel body features an adjustable side hose connection with Airtact function. Please note – this Handpiece is designed for use with the Gravermach AT unit (TOOLSGRGMA) only.
  • GRS Micro Block Ball Vice with 30-Piece Accessory Kit

    Designed for a unique combination of solid work support in a small and maneuverable size, the MicroBlock has a self-centering jaw system made for stone setting, small engravings, and other precision work. The internal rotational brake system lets the user choose the amount of rotational resistance from free to locked. Its low profile is suited for microscope work. Includes 4 pins, 2 wrenches, 6 screws, plastic base, 1 plastic hex key, and Thermo-Loc Sample Kit. This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • GRS QC MAGNUM PALM HANDPIECE

    No other impact handpiece can equal the Magnum's range of power from amazingly heavy to very fine. This piece exceeds the power of previous models that are twice its length. It has very fine control and shading capability.
  • GRS TURNTABLE BASE KIT

    The GRS Turntable Base Kit is a heavy turntable base lets you reposition the work's centre of rotation for working under a microscope. The 10" (254mm) diameter turntable has a unique bearing system coupled between the two flat ground steel plates. A removable centring post lets you position the turntable directly under the microscope. Comes with Brake Kit and Low-Friction PTFE Pad. Does not include vise or block. This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • GRS CAMERA MOUNT SYSTEM

    This new and improved mounting system allows you to video what you see through the microscope without making any adjustments. It keeps your work piece centered at all times.
  • GRS Benchmate Setters Package

    The complete BenchMate package. Complete with BenchMate Basic packBE008/RC inside ring holderBE008/1 bench pinBE008/FMP mounting plate and shellac pad.
  • GRS Quick Change Handpiece - New Model 901 Q.C.

    The comfortable, compact shape has an adjustable side hose connection and it fits most stone setting and engraving needs, including microscopic engraving, deep relief work and bead raising/hammer setting. Includes 6 quick change holders.
  • GRS Ceramic Lap 150mm

    Additional wheel for power hone graver sharpening system. Ceramic gives a finer finish than diamond wheels.
  • GRS Microblock Ball Vice Without Attatchment Set

    Designed for a unique combination of solid work support in a small and manoeuvrable size, the MicroBlock has a self-centering jaw system made for stone setting, small engravings, and other precision work. The internal rotational brake system lets the user choose the amount of rotational resistance from free to locked. Its low profile is suited for microscope work. This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • GRS BALL PIVOT CAMERA MOUNT

    The new GRS compact mount attaches to the stem of the ball pivot on a GRS Acrobat Stand and can be configured on the left or right of the microscope The installed RAM ball mounting components allow a wide range of positioning options. Fits any camera model with a standard 1/4'' x 20 mount capability. This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • GRS Optia LED Ring Light

    With natural spectrum LED lighting and adjustable brightness this LED ring light is easily added to most microscopes using the three adjustable screw threads. 220 V model.
  • GRS MULTI-PURPOSE VICE

    For BenchMate System. The Multi-Purpose Vise uses the versatile "lift on/lift off" BenchMate mounting system. Unlike other bench vises, you can adjust it to any angle because it tilts and rotates on two axes. So your work adjusts to you, adding comfort and efficiency to your bench setup. By using the same attachments as the GRS engraving block, the Multi-Purpose Vise solves dozens of holding problems. It is precision-made from steel for rugged dependability. Includes vise assembly and wrench. Fits any BenchMate Fixed Mounting Plate (not included). Jaws are 2.3” wide, 1.6” tall and open to 1.8”. Fits any BenchMate Fixed Mounting Plate and Optional Mounting Adapter (not included). This item will have to be sent via UK Mail Hazardous Materials & Liquids Only

Items 1 to 30 of 120 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4