•     Over 250 years of quality service

  •     Freepost on orders over £100

  •     Traditional Values, 21st Century Service

Rolling Mills

5 Item(s)

per page

  • PEPE ROLLING MILL COMBINATION 90MM

    90MM Combination ULTRA Mill PEPE rollers are made from a high-quality carbon steel alloy that offers excellent wear and resistance and the outer 3mm of the rolls are hardened to 65 HRC for superior deformation resistance. This 90mm Combination mill is designed roll sheet and wire as required. Gear ratio 4:1 Roller width 90mm Roller diameter 42.6mm Maximum openings 5mm Flat area (+/- 0.01mm) 90mm Square wire (+/- 0.01mm) : 1.0, 2.0, 3.0, 4.0 Ring shank - half round: 2.5 x 1:3 x 1.25 ; 4 x 1.5 Capable of producing metal foil as thin as 0.02mm Polished and machined rolls to achieve a mirror finish.
  • PEPE ROLLING MILL COMBINATION 130MM

    130mm Combination Ultra Mill PEPE rollers are made from a high quality carbon steel alloy that offers excellent wear resistance and the outer 3mm of the rolls are hardened to 65 HRC for superior deformation resistance. Gear ratio 4:1 Roller width 130mm Roller diameter 65mm Maximum opening 5mm Flat area (+/- 0.01mm) 130mm Square wire (+/- 0.01mm) : 1.0, 2.0, 3.0, 4.0 , 4.5, 5.0, 5.5, 6.0, 6.5 Ring shank - half round: 2.5 x 1:3 x 1.25 ; 4 x 1.5 Capable of producing metal foil as thin as 0.02mm Polished and machined rolls to achieve a mirror finish.
  • PEPE ELECTRIC ROLLING MILL COMBINATION 130MM 220V

    130mm combination Electric Ultra Rolling Mill Centre Dial 0-100: Regulates speed at which the rollers turn Forward/Stop/Reverse switch On/Off Switch Rollers: 130mm Length x 65mm Diameter Mirror finished and induction hardened to 60-62 HRC Rolling Mill Body is one-piece precision cast construction for ULTRA strength and durability Production Speed 0-12 RPM Production Output - 7.5 Ft/min or 2.3 m/min THIS ITEM IS TO ORDER.
  • Microfold Corrugating Scrolls

    The Microfold brake is a type of rolling corrugator that can be used with sheet metal, wire and tube. Use this tool to add corrugation to your jewellery pieces. The rollers are made of 24 pitch steel pinion wire that are hardened and anodised to prevent roller damage and rusting. The heat-treated rollers ensure crisp patterning. The removable end block allows you to corrugate a complete tube of metal. Suitable for use with silver, gold copper, red brass, bronze. Anneal and clean the metal before use. The Microfold brake can be mounted to the table top or work bench as well as in a vice.
  • Locking Cabinet for all Durston Mills

    Cabinet Stand for all manual mills with a locking door and shelf.

5 Item(s)

per page