•     Over 250 years of quality service

  •     Freepost on orders over £100

  •     Traditional Values, 21st Century Service

Pendant Drill & Handpieces

30 Item(s)

per page

  • Ceramic Files

    These files are very tough and resistant to cracking or breaking but can still be cut to shape. The flat ceramic files are 100mm long and 4 x 1mm in cross section, they will fit either into a plastic holder or alternatively a special Badeco pendant drill handpiece which converts the rotary motion to a linear filing motion. File either using the frontal edge or the flat side surfaces. The round ceramic files are 50mm in length and 2.35mm in diameter which means they fit a pendant drill quick release handpiece or micromotor. They can be shaped to a dome, a cone or to a point, they are useful for filing in areas where a reciprocal action is not possible. Ceramic Files - Ideal for gold and silver Diamond Files - Made from diamond impregnated ceramic fibres. Very hard wearing ideal for polishing, grinding and filing harder metals.
  • Foredom Flex Shaft Motor Kit With Pepe Jump Ring Maker Kit

    Combined Kit from FOREDOM & PEPE Tools featuring Foredom’s most popular Series SR Motor; 1/6hp 18,000 rpm motor with forward & reverse, Variable speed foot control and Foredom’s most popular H.30 Quick Release Handpiece ideal for general purpose for use with 2.35mm shank burrs. This is combined with the Pepe Tools Jump Ring Maker designed for use with the Foredom H.30 Handpiece. The maker is supplied with 20 mandrels from 2.5mm – 12mm in 0.5 mm increments. Simply fit the chosen mandrel into the keyless chuck and coil your wire onto the mandrel by turning the handle to create the desired quantity of jump rings. Remove the coil from the mandrel and place it onto the coil holder. Attach the sawblade holder to a Foredom No. 30 hand piece and then safely cut your coil into jump rings with the rotary saw blade. To preserve the life of your sawblade where you have drawn your own wire, we recommend that the wire is annealed before coiling. Powder coated black aluminium base. Includes PepeLube and Blade. Do not use with Stainless Steel. Made in U.S.A. FREE Accessory kit with rotating burr stand also included: 43 Piece Accessory Kit includes; assortment of metal working accessories including various shapes, sizes and grits of Satin Finishers, Bristle and Brass Cup, Wheel & End Brushes, Scotch-Brite, Radial Bristle Discs, High Speed Steel Fluted Engraving Burs, Rubber Bonded Abrasive Wheel and Disc, Purple Ceramic Sanding Bands, Screw and Rubber Drum Mandrels, V Stone and Unitized Points, and Platinum White Polishing Compound and 1 x Rotating Burr Holder.
  • Round Ceramic Files

    Round Ceramic Files are designed to fit straight into a pendant drill or micromotor. The round ceramic files are 50mm in length and 2.35mm in diameter which means they fit a pendant drill quick release handpiece or micromotor. They can be shaped to a dome, a cone or to a point, they are useful for filing in areas where a reciprocal action is not possible. TOOLSABR31 & TOOLSABB31 will fit a Badeco powdered handpiece.
  • 1/5hp Pendant Drill Milbro Fixed Hand Piece, 18000rpm

    Milbro 1/5 HP motor18000 rpm. Cable is supplied with a fixed handpeice which comes supplied with 4 collets (chucks) Zero 1/163/321/8 which allows you to accept tool diameters of 0.01mm - 3.00mm. Includes metal foot control. This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • 1/5hp Pendant Milbro Slip Joint, 18000rpm

    Milbro 1/5 HP motor, 18,000 rpm slipjoint format handpiece, cable is supplied in slip-joint format. Slip-joint format gives you the ablility to attach a wide range of hand pieces, such as hammer action or quick release, to the end of your cable making your motor even more versatile. Includes metal foot control. *PLEASE NOTE YOU WILL NEED A SLIP-JOINT FORMAT HAND PIECE TO USE THIS DRILL OUT THE BOX! This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • BADECO MICROFILING HAND PIECE - FOREDOM FITTING

    Bedeco Microfiling Handpiece designed to fit Foredom pendant drill cable. Converts rotary motion to a reciprocating motion to enable precision filing. 5000 strokes per minute with minimum vibration.
  • 1/10hp Pendant Drill with Fixed Hand Piece, 12000rpm

    Cable is supplied with a fixed handpiece which comes supplied with 4 collets (chucks) Zero1/163/321/8 which allows you to accept tool diameters of 0.01mm - 3.00mm. 1/10 HP motor 12000 rpm. Includes plastic foot control. This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • 1/10hp Pendant Drill Slip Joint, 12000rpm

    Milbro 1/10 HP motor, 12,000 rpm slipjoint handpiece cable is supplied in slip-joint format. Slip-joint format gives you the ablility to attach a wide range of hand pieces, such as hammer action or quick release, to the end of your cable making your motor even more versatile. Includes plastic foot control. *PLEASE NOTE YOU WILL NEED A SLIP-JOINT FORMAT HAND PIECE TO USE THIS DRILL OUT THE BOX* This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • Badeco Micro Filing Hand Piece

    Top quality Badeco microfiling handpiece to fit slipjoint pendant drill cable. Converts rotary motion to a reciprocating motion to enable precision filing with minimum effort. The filing stroke is just 1mm with 5,000 strokes per minute and minimal vibration. 100mm x 4mm x 1mm flat ceramic files slot into the collet, fixed with a grub screw. Ceramic files can be cut and shaped to the job in hand are available in 220, 400 800 and 1200 grit. Diamond files are available in 400 and 800 grit. The collet can also hold 3mm round ceramic files.
  • SR Series Motor Kit

    The Foredom SR Pendant Motor; Foredom's most popular and best motor for general use. Complete with: SR Pendant Motor; Forward & reverse 1/6 hp 18,000 RPM motor Foredom quick release cable Type 20 Quick release interchangeable handpiece for use with 2.35mm burrs. Variable foot control FREE 43 piece accessory kit with rotating burr stand. Includes: 1 x Rotating Burr Holder 1 x Platinum Bar 6 x Radical Discs 3 x Purple Ceramic Sanding Bands 60 grit 3 x Purple Ceramic Sanding Bands 80 grit 3 x Purple Ceramic Sanding Bands 120 grit 3 x Purple Ceramic Sanding Bands 220 grit 1 x Satin Finish Scotchbrite, Fine, mounted 1 x Satin Finish Scotchbrite, Coarse, mounted 1 x Rubber Bonded Abrasive wheel, Brown 60 grit 1 x Rubber Bounded Abrasive wheel, Black 120 grit 1 x Rubber Bounded Abrasive wheel, Green 180 grit 3 x CW Polishing Wheels 1 x CUT-OFF Disc 1 x Felt Buff, Unmounted 2 x Mandrels 5 x Mounted Brushes 4 x High Speed Vanadium Steel Fluted Engraving Burrs 1 x Rubber Sanding Drill Mandrel 1 x V Stone point Cylinder This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • BADECO 275 QUICK RELEASE HANDPIECE

    Badeco 275 Quick Release Handpiece. High quality and robust handpiece supplied with a standard collet: Ø 2,34mm.
  • Motor Kit with type 30 hand piece

    Including Foredom SR Series Pendant Motor, Type 30 Handpiece + Accessories. Complete pendant drill package includes: SR Series Motor; 1/6hp 18,000 rpm motor with forward & reverse Type 30 quick release handpiece, for use with 2.35mm shank burrs Variable speed foot control Designed to fit the TOOLSW099 - Pepe Jump Ring Maker FREE Accessory kit with rotating burr stand: 43 Piece Accessory Kit includes; assortment of metal working accessories including various shapes, sizes and grits of Satin Finishers, Bristle and Brass Cup, Wheel & End Brushes, Scotch-Brite, Radial Bristle Discs, High Speed Steel Fluted Engraving Burs, Rubber Bonded Abrasive Wheel and Disc, Purple Ceramic Sanding Bands, Screw and Rubber Drum Mandrels, V Stone and Unitized Points, and Platinum White Polishing Compound and 1 x Rotating Burr Holder. This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • FOREDOM LX SERIES MOTOR

    The LX is Foredom's most powerful pendant motor, delivering high power from start-up to its maximum speed of 5,000 rpm. It's perfect for low-speed work such as stone setting, where speeds higher than 5,000 rpm can damage the mechanism of hammer action handpieces. Please note - This pendant motor is supplied without a handpiece. Foredom warrants the Series LX Motor to be free of defects in material or workmanship for a period of 2 years after purchase. This warranty does not cover damage caused in transit or by accident, misuse, or ordinary wear of shafts, sheaths, bearings, armature, and motor brushes. Shafts, sheaths and duplex springs are not covered by this warranty since they are especially sensitive to the pressure and stress variables of the individual operator. For full warranty details refer to the product manual. TOOL TIP: The hammer action handpiece is designed to work with the slower LX model of the Foredom pendant drills due to the fact it has a high torque and a lower speed of 5,000 rpm, this allows the hammer action to be controlled better. As well as the handpiece is not designed to be operated at the high speed. If you would like to use your original drill please take care not to run the drill on full to prevent any damaged caused to the handpiece and your work. As the hammer action hand piece works on a knocking action the tips are not the same as the burrs and drills, they have a screw tread which tightens the tip into the collet. This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • BADECO HAMMER ACTION HANDPIECE

    The Badeco 215 hammer action handpiece for pendant motors. Ideal for stone-setting, texturing and riveting. Complete with a unhardened steel tip which can be shaped and impact regulator. This hammer action handpiece has a regular stroke striking action. High precision Robust Supplied with tip
  • FARO QUICK RELEASE SLIP JOINT HANDPIECE

    The Faro quick-release handpeice allows you to easily change tools with just the flick of a switch. Suitable for use with Milbro Slip Joint pendant motors. Speeds up to 20,000 RPM.
  • Foredom Drill Press

    Precision drill presstakes Foredom No. 30 handpiece (PD075 & PD075/SJ) only.
  • H.18 QUICK RELEASE FOREDOM HANDPIECE

    Slimline quick release with lever action handpiece with Foredom fitting. Press lever down to release collet. For use with 2.35mm shank burrs.
  • FOREDOM TYPE 15 HAMMER ACTION HANDPIECE

    Ideal for stone-setting, engraving and texturing, complete with shapeable tip and impact control. Recommended for use with the LX Foredom Motor. TOOL TIP: The hammer action handpiece is designed to work with the slower LX model of the Foredom pendant drills due to the fact it has a high torque and a lower speed of 5,000 rpm, this allows the hammer action to be controlled better. As well as the handpiece is not designed to be operated at the high speed. If you would like to use your original drill please take care not to run the drill on full to prevent any damaged caused to the handpiece and your work. As the hammer action hand piece works on a knocking action the tips are not the same as the burrs and drills, they have a screw tread which tightens the tip into the collet.
  • FOREDOM TYPE 15 HAMMER ACTION HANDPIECE

    FITS FOREDOM MOTORS ONLY. This Hammer Type 15 Slip Joint Handpiece has a hammering rather than rotary action for use at low speed (0-5,000 rpm) by jewellers for stone setting and decorative work.
  • Foredom No.18 Quick Release Slipjoint Handpiece

    Has super slim grip and lever action for exclusive use with 2.35mm shank burrs. Fits all European style motors including Seco & Milbro. Simply depress the lever and the bur releases in seconds.
  • set of 6 anvil points for foredom type 15 handpiece

    Designed for use with the Foredom Type 15 Handpiece H.15 TOOLSPD052 & H.15 SJ TOOLSPDS52 as well as Swiss Made Badeco Hammer Action Handpiece TOOLSPD081.
  • FOREDOM TYPE 20 QUICK RELEASE HASLIPJOINT HANDPIECE

    For European Slip-Joint Fitting Motors only. A larger diameter quick-release hand piece. Simply flick the lever to release your tools to use with 2.35mm shank burrs. It has a moulded plastic front grip with tapered sides for easy and close handling.
  • Type 20 Standard Quick Change

    Quick release handpiece with Foredom fitting. Push lever to left or right to release the collet to change accessories. Use exclusively with 2.35mm shank burrs.
  • HAND CONTROL FOR PD051 FOREDOM MOTOR

    Electronic Manual Control with Dial for Foredom's SR Series Motor Kit TOOLSPD051. Table Top Unit Durable Precise Speed Settings 220 Volt
  • FOREDOM TYPE 30 HANDPIECE

    The Foredom Type 30 Handpiece features a 3-Jaw chuck adjustable from 0-4mm. Complete with chuck key. This general handpiece benefits from lubicated ball bearings that do not require additional lubrication.
  • FOREDOM TYPE 30 HANDPIECE SLIP JOINT

    Type 30 Handpiece Slip Join; tFeatures a 3-Jaw chuck adjustable from 0-4mm. Complete with chuck key.
  • 3MM BADECO MICROFILING COLLET

    Spare Collet for Badeco Handpiece
  • BADECO COLLET 0.8MM

    Spare Collet for Badeco Handpiece
  • BADECO COLLET 3/32"-2.35mm

    Spare Collect for Badeco Handpiece

30 Item(s)

per page