•     Over 250 years of quality service

  •     Freepost on orders over £100

  •     Traditional Values, 21st Century Service

Micromotors

4 Item(s)

per page

  • OSADA SUCCESS 40 MICROMOTOR

    The Osada Success 40 Micromotor is a best seller in Germany and is now available in the UK, exclusively from Sutton Tools. It has a brilliant range of features which mark it out as class leading: Exceedingly quiet, smooth and beautifully balanced handpiece with brushless motor and quick release lever for 2.35mm shanks. Speeds range from 1,000 to 40,000 rpm with 4.8N-CM of torque with feedback circuitry ensuring smooth delivery of power, particularly at low speed. Forward/reverse and constant/variable mode. In constant mode you set the speed, press the foot pedal to start the motor and again to stop it. In variable mode you set the maximum speed on the dial and then no matter how far you press the foot pedal it will not exceed the maximum set. The blue light on the dial shows the maximum speed and flashes to indicate the direction of rotation has been reversed. The foot pedal is a linear control ie. the speed is directly proportional to the amount of travel. This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • FOREDOM K1020 HIGH TORQUE MICROMOTOR

    The K1020 High Torque Micromotor has extra power/torque that makes it great for deburring cast pieces, polishing, taking down weld seams, moderate to heavy grinding and rapid metal removal. If you need high speed (up to 20,000 rpm) greater manoeuvrability than a flex shaft but still need the power to tackle heavy work, then this is for you. The 3 jaw chuck accepts shanks up to 4mm. Control Unit has switches for On/Off Power, Forward/Reverse Rotation, and Manual/Foot Speed Control selection. Overload Protection turns on a red light and sounds a beeping alarm if the motor ever stalls. The Control Box Back has a voltage selector switch that lets you choose from 110/120 or 220/240 volt and receptacles for the Variable Speed Foot Control or Optional On/Off Foot Switch. This is the same control unit that comes in the Micromotor Kit K.1070 TOOLSPD070. Micro Grinder Handpiece has a geared 3-jaw chuck that takes any size rotary accessory or drill bit with shanks up to 4mm diameter. Length= 205.8mm, Weight= 510 grams, Diameter= 26mm at chuck end. This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • FOREDOM K1070 QUICK RELEASE MICROMOTOR

    A high speed rotary micromotor with 2.35mm collet and speeds up to 38,000 rpm, ideal for precise, high speed work. The handpiece has a slender, contoured grip for precise, high speed work and a quick release chuck. Handpiece weighs just 208 grams with lightweight coiled cable for excellent flexibility. The fan cooled brush type continuous duty motor, runs cool and vibration free, with permanently lubricated, shielded bearings. Kit complete with control box, variable speed foot control, quick release handpiece plus handpiece rest, spare fuse and motor brushes. Control box has on/off switch, forward/reverse and manual/foot controls Compared to flexible shaft machines, micromotors have less torque, however, their higher speed results in a comparable rate of material removal with a lighter touch. The simple cord connection between the handpiece motor and control box is another key advantage. Micromotors offer much greater freedom of movement. This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • FOREDOM K1030 PORTABLE MICROMOTOR

    A fully functioning portable micromotor. The control unit includes a built in rechargeable battery unit. You can plug it in or use the battery which has a life of up to 5 hours. The unit features a digital RPM display at the top which makes it easy to monitor the speed as you work up to 30,000rpm. This kit is perfect for users who work at multiple stations or where power may be an issue. The handpiece is lightweight but durable and ideal for polishing and fine details. The handpiece has a twist release rotary type collet for easy changes of 2.35mm. Its fan cooled, brush type continuous duty motor runs cool and vibration-free. It has permanently lubricated, shielded ball bearings that require no additional lubrication. This item will have to be sent via UK Mail Hazardous Materials & Liquids Only

4 Item(s)

per page