•     Over 250 years of quality service

  •     Freepost on orders over £100

  •     Traditional Values, 21st Century Service

Jentner Electroplating Systems

22 Item(s)

per page

  • Jentner RMGO! Kit 1 for Rhodium Plating

    Introducing the new Jentner RMGO! speed plating kits for degreasing, rhodium and cold gold plating. The pre-set processing times and voltages allows a quick and professional finish. The time intervals can be selected between 15, 30 or 60 seconds. This guarantees a reliable calculation with an automatic power shut off after the selected time resulting in an optimal finish and no wasted precious metal. Choose time and press GO! Made in Germany. Advantages: Rhodium savings due to pre-set deposition time - A deposit time of 36 seconds instead of 30 seconds will cost you 20% more of your expensive rhodium. This is a cost savings of 0.2 g of rhodium at 1000 rings when coated exactly 30 seconds. Absolutely safe process as the voltage does not have to be adjusted. Simple and user friendly with one GO! Button. Plate more than 1000 rings with 1 litre of rhodium solution JE88 resulting in a brilliant and glossy surface. The solutions are available as concentrates or ready to use baths. Small and easy to store. Ready to GO! RMGO! Kit for Rhodium Plating. This Kit includes: 1 x RMGO! Unit 2 x Beaker 1000ml incl. lid 2 x Beaker 600ml incl. lid 2 x red Cable 1 x black Cable with crocodile clip 1 x Stainless steel anode 1 x Mixed oxide anode 1 x Jig with 4 hooks Solutions and degreasing salts sold separately. Choose your preferred ready to use bath or concentrate solution: UK's Official Jentner Distributor 12 Month Warranty
  • Jentner RMGO! Kit 2 for Rhodium and Cold Gold Plating

    ntroducing the new Jentner RMGO! speed plating kits for degreasing, rhodium and cold gold plating. The pre-set processing times and voltages allows a quick and professional finish. The time intervals can be selected between 15, 30 or 60 seconds. This guarantees a reliable calculation with an automatic power shut off after the selected time resulting in an optimal finish and no wasted precious metal. Choose time and press GO! Made in Germany. Advantages: Rhodium savings due to pre-set deposition time - A deposit time of 36 seconds instead of 30 seconds will cost you 20% more of your expensive rhodium. This is a cost savings of 0.2 g of rhodium at 1000 rings when coated exactly 30 seconds. Absolutely safe process as the voltage does not have to be adjusted. Simple and user friendly with one GO! Button. Plate more than 1000 rings with 1 litre of rhodium solution JE88 resulting in a brilliant and glossy surface. The solutions are available as concentrates or ready to use baths. Small and easy to store. Ready to GO! RMGO! Kit for Rhodium and Cold Gold Plating. This kit includes: 1 x RMGO! Unit 3 x Beaker 1000ml incl. Lid 3 x Beaker 600ml incl. Lid 3 x red Cable 1 x black Cable with crocodile clip 2 x Stainless steel anode 1 x Mixed oxide anode 1 x Jig with 4 hooks Solutions and degreasing salts sold separately. Choose your preferred ready to use bath or concentrate solution: UK's Official Jentner Distributor 12 Month Warranty
  • Jentner RMGO! Kit 3 for Cold Gold Plating

    Introducing the new Jentner RMGO! speed plating kits for degreasing, rhodium and cold gold plating. The pre-set processing times and voltages allows a quick and professional finish. The time intervals can be selected between 15, 30 or 60 seconds. This guarantees a reliable calculation with an automatic power shut off after the selected time resulting in an optimal finish and no wasted precious metal. Choose time and press GO! Made in Germany. Advantages: Rhodium savings due to pre-set deposition time - A deposit time of 36 seconds instead of 30 seconds will cost you 20% more of your expensive rhodium. This is a cost savings of 0.2 g of rhodium at 1000 rings when coated exactly 30 seconds. Absolutely safe process as the voltage does not have to be adjusted. Simple and user friendly with one GO! Button. Plate more than 1000 rings with 1 litre of rhodium solution JE88 resulting in a brilliant and glossy surface. The solutions are available as concentrates or ready to use baths. Small and easy to store. Ready to GO! RMGO! Kit for Cold Gold Plating. This Kit includes: 1 x RMGO! Unit 2 x Beaker 1000ml incl. lid 2 x Beaker 600ml incl. lid 2 x red Cable 1 x black Cable with crocodile clip 2 x Stainless steel anode 1 x Jig with 4 hooks Solutions and degreasing salts sold separately. Choose your preferred ready to use bath or concentrate solution: UK's Official Jentner Distributor 12 Month Warranty
  • JENTNER RM01 KIT1 FOR RHODIUM PLATING

    This is the complete system for Rhodium Plating at room temperature, made by German electroplating experts Jentner. It contains a one-touch plating system unit, glass beakers & lids, stainless steel anode for degreasing and one mixed oxide anode for rhodium plating plus cables and jig with four hooks. The voltage is fixed at the optimum for rhodium plating, so the only control necessary is the on/off switch. No waiting for the solutions to heat up and no fumes from hot solutions. The lipped glass beakers allow the solutions to be immediately put back into their containers for safety and convenience. The circular anodes fit snugly to the sides of the beakers allowing maximum space and a uniform plating thickness. Supplied with 100g of degreasing salts and 1x JE88 Rhodium concentrate 100mm/2g Rh. Dimensions: 200(l) x200(d) x300(h) mm Weight: 7kg UK’s Official Jentner Distributor 12 Month Warranty
  • JENTNER RM01 KIT3 FOR COLD FOR GOLD PLATING

    This is the complete cold gold plating system for gilding at room temperature, made by German electroplating experts Jentner. Kit contains RM01 one touch plating system unit, glass beakers and lids, two stainless steel anodes (one for degreasing and one for gilding) plus cables, clamp and jig with four hooks. The voltage is fixed at the optimum for gilding, so the only control necessary is the on/off switch. No waiting for the solutions to heat up and no fumes from hot solutions. The lipped glass beakers allow the solutions to be immediately put back into their containers for safety and convenience. The circular anodes fit snugly to the sides of the beakers allowing maximum space and a uniform plating thickness. Supplied with 100g of degreasing salts and 1 x litre of ready mixed cold gold plating solution. This system can be upgraded at a later stage to add rhodium plating with the purchase of a mixed oxide anode and additional beakers and leads. Dimensions: 200(l) x200(d) x300(h) mm Weight: 7kg UK’s Official Jentner Distributor 12 Month Warranty
  • JENTNER COMFORT II PLATING UNIT ONLY

    Professional Digital Plating Unit with 3 x 1.5 litre tanks - one for degreasing and two for plating, plus three holding or rinsing tanks. Agitation can be switched on (recommended for hard gold plating). The digital display panel shows temperature, countdown, volts and amps. There are pre-set programmes for most plating operations and you can configure and save your own preferences. The Digital II monitors fluctuations in the current (amps) and adjusts the plating time to compensate, thus ensuring that plating thickness is uniform. This unit allows process parameters to be replicated correctly every time and the unit will terminate the job on completion, allowing you to concentrate on other work or deal with distractions without having to constantly monitor the plating process. Once users learn to calculate the precious metal content of the solutions in ampere/minutes the Digital II can monitor and display the rate of depletion of precious metals in each tank. Includes a pen plating connector. Dimensions: 500(w) x 320 (d) x 250(h)mm Weight: 16kg Bath Dimensions: 150 x 100 x 150mm Price shown is the basic cost which includes tanks and temperature/level sensor, but you will need to select appropriate anodes, jigs and if necessary a heater and its fixing clip. You can select the accessories you require for the Digital II from the following list. For degreasing and gold plating you will need a stainless steel anode TOOLSPS063 (we recommend two for each tank). For rhodium plating you will need two mixed oxide anodes TOOLSPS064 For gold plating you will need a heated solution, so add immersion heater TOOLSPS067 and its optional mounting clip TOOLSPS67C. UK Official Jentner Distributor 12 Month Warranty

  • JENTNER DIGITAL II PLATING UNIT ONLY

    Professional Digital Plating Unit with 3 x 1.5 litre tanks - one for degreasing and two for plating, plus three holding or rinsing tanks. Agitation can be switched on (recommended for hard gold plating). The digital display panel shows temperature, countdown, volts and amps. There are pre-set programmes for most plating operations and you can configure and save your own preferences. The Digital II monitors fluctuations in the current (amps) and adjusts the plating time to compensate, thus ensuring that plating thickness is uniform. This unit allows process parameters to be replicated correctly every time and the unit will terminate the job on completion, allowing you to concentrate on other work or deal with distractions without having to constantly monitor the plating process. Once users learn to calculate the precious metal content of the solutions in ampere/minutes the Digital II can monitor and display the rate of depletion of precious metals in each tank. Includes a pen plating connector. Dimensions: 500(w) x 320 (d) x 250(h)mm Weight: 16kg Bath Dimensions: 150 x 100 x 150mm Price shown is the basic cost which includes tanks and temperature/level sensor, but you will need to select appropriate anodes, jigs and if necessary a heater and its fixing clip. You can select the accessories you require for the Digital II from the following list. For degreasing and gold plating you will need a stainless steel anode TOOLSPS063 (we recommend two for each tank) For rhodium plating you will need two mixed oxide anodes TOOLSPS064 For gold plating you will need a heated solution, so add immersion heater TOOLSPS067 and its optional mounting clip TOOLSPS67C UK’s Official Jentner Distributor 12 Month Warranty
  • JENTNER MIXED OXIDE ANODE FOR COMFORT AND DIGITAL II

    Mixed oxide anode designed for use with rhodium plating solutions which are incompatible with stainless steel.
  • JENTNER SS ANODE FOR COMFORT/DIGITAL II

    Stainless Steel anode designed for use with all non-rhodium plating and degreasing solutions.
  • MIXED OXIDE ANODE FOR RM01

    Round mixed oxide metal anode for use with the Rhodium Machine RM01 TOOLSPS058. Designed to fit into beakers with a volume of 600-1000ml as the anode will expand. The mixed oxide anode is suitable for rhodium and black rhodium solutions at room temperature. For degreasing and flash gold plating at room temperature a stainless steel anode is required TOOLSPS53S.
  • STAINLESS STEEL ANODE FOR RM01

    Round stainless steel anode for use with the Rhodium Machine RM01 TOOLSPS059. Designed to fit into beakers with a volume of 600-1000ml as the anode will expand. The stainless steel anode is suitable for degreasing and flash gold plating at room temperature. For rhodium plating at room temperature a mixed oxide anode is required TOOLSPS53M.
  • JENTNER IMMERSION HEATER 200W

    Transferable heater enabling the user to select the tank to be heated. Thermostatically controlled by the control panel. Requires titanium bracket (PSC67 to hook onto side of tank).
  • TITANIUM CLIP FOR IMMERSION HEATER

    Hooks onto side of plating tank allowing heater to be held in position.
  • CAP FOR GLASS BEAKER 600ML

    Cap for glass beaker 600ml. Ideal for use with the RM01 & RMGO! plating kits. Beaker available to purchase separately TOOLSPS056.
  • GLASS BEAKER 600ML

    Glass beaker 600ml. Ideal for use with the RM01 & RMGO! plating kits. Lid available to purchase separately TOOLSPSC56.
  • CAP FOR GLASS BEAKER 1000ML

    Lid for glass beaker 1000ml. Glass beaker 600ml. Ideal for use with the RM01 & RMGO! plating kits. Beaker available to purchase separately TOOLSPS055.
  • GLASS BEAKER 1000ML

    Glass beaker 1000ml. Ideal for use with the RM01 & RMGO! plating kits. Lid available to purchase separately TOOLSPS5CP Also available in 600ml TOOLSPS056.
  • JENTNER RING JIG 12 HOOKS

    Jig with 12 hooks for rings, suitable for Comfort II and Digital II plating units. 150 x 70mm
  • JENTNER CHAIN JIG 12 HOOKS

    Jig with 12 hooks for chains, 150x70 mm, suitable for Comfort II and Digital II plating units.
  • JENTNER JIG FOR RINGS 24 HOOKS

    Jig with 24 hooks for rings, 160 x 100mm, suitable for Comfort V and Digital V plating units.
  • Jentner Plastic Lid PP for 5 Litre Tank

    Plastic Lid for Jentner 5 Litre plating tanks.

22 Item(s)

per page