•     Over 250 years of quality service

  •     Freepost on orders over £100

  •     Traditional Values, 21st Century Service

Electroplating Equipment

26 Item(s)

per page

  • JENTNER DIGITAL II PLATING UNIT ONLY

    Professional Digital Plating Unit with 3 x 1.5 litre tanks - one for degreasing and two for plating, plus three holding or rinsing tanks. Agitation can be switched on (recommended for hard gold plating). The digital display panel shows temperature, countdown, volts and amps. There are pre-set programmes for most plating operations and you can configure and save your own preferences. The Digital II monitors fluctuations in the current (amps) and adjusts the plating time to compensate, thus ensuring that plating thickness is uniform. This unit allows process parameters to be replicated correctly every time and the unit will terminate the job on completion, allowing you to concentrate on other work or deal with distractions without having to constantly monitor the plating process. Once users learn to calculate the precious metal content of the solutions in ampere/minutes the Digital II can monitor and display the rate of depletion of precious metals in each tank. Includes a pen plating connector. Dimensions: 500(w) x 320 (d) x 250(h)mm Weight: 16kg Bath Dimensions: 150 x 100 x 150mm Price shown is the basic cost which includes tanks and temperature/level sensor, but you will need to select appropriate anodes, jigs and if necessary a heater and its fixing clip. You can select the accessories you require for the Digital II from the following list. For degreasing and gold plating you will need a stainless steel anode TOOLSPS063 (we recommend two for each tank) For rhodium plating you will need two mixed oxide anodes TOOLSPS064 For gold plating you will need a heated solution, so add immersion heater TOOLSPS067 and its optional mounting clip TOOLSPS67C UK’s Official Jentner Distributor 12 Month Warranty
  • Jentner Gold & Rhodium Plating System

    This is the complete cold plating system for gilding and rhodium plating at room temperature, made by German electroplating experts Jentner. Kit contains RM01 one touch plating system unit, glass beakers and lids, two stainless steel anodes (one for degreasing and one for gilding) and one mixed oxide anode (for rhodium plating), plus cables and jig with four hooks. The voltage is fixed at the optimum for gilding and rhodium, so the only control necessary is the on/off switch. No waiting for the solutions to heat up and no fumes from hot solutions. The lipped glass beakers allow the solutions to be immediately put back into their containers for safety and convenience. The circular anodes fit snugly to the sides of the beakers allowing maximum space and a uniform plating thickness. Supplied with: Degreasing salts 1 x litre of ready mixed cold gold plating solution 1 rhodium concentrate JE88 100ml/2g Rh Dimensions: 200(l) x200(d) x300(h) mm Weight: 8kg UK’s Official Jentner Distributor 12 Month Warranty
  • JENTNER RM01 KIT1 FOR RHODIUM PLATING

    This is the complete system for Rhodium Plating at room temperature, made by German electroplating experts Jentner. It contains a one-touch plating system unit, glass beakers & lids, stainless steel anode for degreasing and one mixed oxide anode for rhodium plating plus cables and jig with four hooks. The voltage is fixed at the optimum for rhodium plating, so the only control necessary is the on/off switch. No waiting for the solutions to heat up and no fumes from hot solutions. The lipped glass beakers allow the solutions to be immediately put back into their containers for safety and convenience. The circular anodes fit snugly to the sides of the beakers allowing maximum space and a uniform plating thickness. Supplied with 100g of degreasing salts and 1x JE88 Rhodium concentrate 100mm/2g Rh. Dimensions: 200(l) x200(d) x300(h) mm Weight: 7kg UK’s Official Jentner Distributor 12 Month Warranty
  • Jentner RMGO! Kit 2 for Rhodium and Cold Gold Plating

    ntroducing the new Jentner RMGO! speed plating kits for degreasing, rhodium and cold gold plating. The pre-set processing times and voltages allows a quick and professional finish. The time intervals can be selected between 15, 30 or 60 seconds. This guarantees a reliable calculation with an automatic power shut off after the selected time resulting in an optimal finish and no wasted precious metal. Choose time and press GO! Made in Germany. Advantages: Rhodium savings due to pre-set deposition time - A deposit time of 36 seconds instead of 30 seconds will cost you 20% more of your expensive rhodium. This is a cost savings of 0.2 g of rhodium at 1000 rings when coated exactly 30 seconds. Absolutely safe process as the voltage does not have to be adjusted. Simple and user friendly with one GO! Button. Plate more than 1000 rings with 1 litre of rhodium solution JE88 resulting in a brilliant and glossy surface. The solutions are available as concentrates or ready to use baths. Small and easy to store. Ready to GO! RMGO! Kit for Rhodium and Cold Gold Plating. This kit includes: 1 x RMGO! Unit 3 x Beaker 1000ml incl. Lid 3 x Beaker 600ml incl. Lid 3 x red Cable 1 x black Cable with crocodile clip 2 x Stainless steel anode 1 x Mixed oxide anode 1 x Jig with 4 hooks Solutions and degreasing salts sold separately. Choose your preferred ready to use bath or concentrate solution: UK's Official Jentner Distributor 12 Month Warranty
  • JENTNER RM01 KIT3 FOR COLD FOR GOLD PLATING

    This is the complete cold gold plating system for gilding at room temperature, made by German electroplating experts Jentner. Kit contains RM01 one touch plating system unit, glass beakers and lids, two stainless steel anodes (one for degreasing and one for gilding) plus cables, clamp and jig with four hooks. The voltage is fixed at the optimum for gilding, so the only control necessary is the on/off switch. No waiting for the solutions to heat up and no fumes from hot solutions. The lipped glass beakers allow the solutions to be immediately put back into their containers for safety and convenience. The circular anodes fit snugly to the sides of the beakers allowing maximum space and a uniform plating thickness. Supplied with 100g of degreasing salts and 1 x litre of ready mixed cold gold plating solution. This system can be upgraded at a later stage to add rhodium plating with the purchase of a mixed oxide anode and additional beakers and leads. Dimensions: 200(l) x200(d) x300(h) mm Weight: 7kg UK’s Official Jentner Distributor 12 Month Warranty
  • MICROPLATING UNIT 3x1 lt.

    The Microplate is one of our most popular and recognisable plating units. Use for de-greasing, plating gold and rhodium plating, for ideal use in production and repairs. Comprising three x 1 litre polypropylene tanks with individual lids and automatic heating which is adjustable from 20-80 degrees Celsius. Two stainless steel anodes are provided for de-greasing and gilding and one Platinum coated Titanium anode for Rhodium plating. Ideal size to accommodate rings, chains, bangles and bracelets. Additionally, outlet ports are built in to plug in a plating pen or additional plating container with ease. Supplied with full instructions. Measurements: 48(W) x 25(H) x 35(D) cm Bath size: 12.5cm diameter x 13cm deep This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • Jentner RMGO! Kit 1 for Rhodium Plating

    Introducing the new Jentner RMGO! speed plating kits for degreasing, rhodium and cold gold plating. The pre-set processing times and voltages allows a quick and professional finish. The time intervals can be selected between 15, 30 or 60 seconds. This guarantees a reliable calculation with an automatic power shut off after the selected time resulting in an optimal finish and no wasted precious metal. Choose time and press GO! Made in Germany. Advantages: Rhodium savings due to pre-set deposition time - A deposit time of 36 seconds instead of 30 seconds will cost you 20% more of your expensive rhodium. This is a cost savings of 0.2 g of rhodium at 1000 rings when coated exactly 30 seconds. Absolutely safe process as the voltage does not have to be adjusted. Simple and user friendly with one GO! Button. Plate more than 1000 rings with 1 litre of rhodium solution JE88 resulting in a brilliant and glossy surface. The solutions are available as concentrates or ready to use baths. Small and easy to store. Ready to GO! RMGO! Kit for Rhodium Plating. This Kit includes: 1 x RMGO! Unit 2 x Beaker 1000ml incl. lid 2 x Beaker 600ml incl. lid 2 x red Cable 1 x black Cable with crocodile clip 1 x Stainless steel anode 1 x Mixed oxide anode 1 x Jig with 4 hooks Solutions and degreasing salts sold separately. Choose your preferred ready to use bath or concentrate solution: UK's Official Jentner Distributor 12 Month Warranty
  • Jentner RMGO! Kit 3 for Cold Gold Plating

    Introducing the new Jentner RMGO! speed plating kits for degreasing, rhodium and cold gold plating. The pre-set processing times and voltages allows a quick and professional finish. The time intervals can be selected between 15, 30 or 60 seconds. This guarantees a reliable calculation with an automatic power shut off after the selected time resulting in an optimal finish and no wasted precious metal. Choose time and press GO! Made in Germany. Advantages: Rhodium savings due to pre-set deposition time - A deposit time of 36 seconds instead of 30 seconds will cost you 20% more of your expensive rhodium. This is a cost savings of 0.2 g of rhodium at 1000 rings when coated exactly 30 seconds. Absolutely safe process as the voltage does not have to be adjusted. Simple and user friendly with one GO! Button. Plate more than 1000 rings with 1 litre of rhodium solution JE88 resulting in a brilliant and glossy surface. The solutions are available as concentrates or ready to use baths. Small and easy to store. Ready to GO! RMGO! Kit for Cold Gold Plating. This Kit includes: 1 x RMGO! Unit 2 x Beaker 1000ml incl. lid 2 x Beaker 600ml incl. lid 2 x red Cable 1 x black Cable with crocodile clip 2 x Stainless steel anode 1 x Jig with 4 hooks Solutions and degreasing salts sold separately. Choose your preferred ready to use bath or concentrate solution: UK's Official Jentner Distributor 12 Month Warranty
  • Jentner Pen Plater

    Stylish Picco+ pen plating unit by Jentner. Fast plating of gold, rhodium and silver without stopping off. Pen has a robust metal barrel into which the tips are directly inserted - so no plastic pens with fiddly wire contacts just perfect all round contact every time. Included: 1x Pen plating unit type Picco+ 1x Pen 1x Tweezer 1x Felt tips square, brown (10 pc) Case is made from stainless steel, dimensions (L)120 X (D)150 X (H)95mm, voltage supply 12v, weight 1.5kg. Use with Jentner Pen Plating solutions. This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • Small Plating Unit with 4 Beakers

    Small plating unit with 4 beakers. The plater is unheated but can be used with a warmed solution making it easy to use. Included: 4 x 100ml Pyrex beakers, stainless steel and platinised titanium anodes and holder. Excellent for single items of jewellery. The unit also has a connection for pen plating. Overall dimensions 24cm x 16cm x 12cm (DxWxH) Weight: 2.5kg This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • DIGITAL PEN PLATER

    Pen plating allows you to work on partial areas on a workpiece, allowing you to work on your jewellery with the desired plating colour(s). This unit has a variable voltage control in a light and compact design. Includes: 1 professional plating pen 3 empty plating jars for solutions with twist off lids to avoid spills 3 double ended X-fine/Bullet Felt Tips 1 alligator clip 1 wire holder Use: The plating pen comes with three double sided felt tips to get you started. The contact on the pen is just inside the tip. Soak the tip in the pen plating solution. Set the voltage of the unit using the adjustment knob. Clip the piece to be plated onto the work clip and bring the felt into contact with the piece moving slowly along the surface. It may be necessary to dip the pen back into the solution and repeat. Pen plating solutions to be purchased separately. This item will have to be sent via UK Mail Hazardous Materials & Liquids Only

  • JENTNER JIG FOR RINGS 24 HOOKS

    Jig with 24 hooks for rings, 160 x 100mm, suitable for Comfort V and Digital V plating units.
  • JENTNER CHAIN JIG 12 HOOKS

    Jig with 12 hooks for chains, 150x70 mm, suitable for Comfort II and Digital II plating units.
  • JENTNER MIXED OXIDE ANODE FOR COMFORT AND DIGITAL II

    Mixed oxide anode designed for use with rhodium plating solutions which are incompatible with stainless steel.
  • PEN FOR PEN PLATING UNIT

    Platinum contact Comfort grip Machined tip provides excellent contact Complete with attached lead wire with alligator clip and 3 felt tips
  • PLATINISED TITANIUM ANODE

    Platinised Titanium Anode for Rhodium Plating.
  • STAINLESS STEEL ANODE FOR RM01

    Round stainless steel anode for use with the Rhodium Machine RM01 TOOLSPS059. Designed to fit into beakers with a volume of 600-1000ml as the anode will expand. The stainless steel anode is suitable for degreasing and flash gold plating at room temperature. For rhodium plating at room temperature a mixed oxide anode is required TOOLSPS53M.
  • GLASS BEAKER 1000ML

    Glass beaker 1000ml. Ideal for use with the RM01 & RMGO! plating kits. Lid available to purchase separately TOOLSPS5CP Also available in 600ml TOOLSPS056.
  • PLASTIC BEAKER 1 lt

    Acid resistant polypropylene beaker 1 Litre
  • ANODE SS 1 LITRE

    Stainless Steel Anode for 1 Litre beaker Use for cleaning and gold plating
  • GLASS BEAKER 600ML

    Glass beaker 600ml. Ideal for use with the RM01 & RMGO! plating kits. Lid available to purchase separately TOOLSPSC56.
  • FINE PEN PLATING TIPS (PACK 10)

    Replacement Pen Plating Tips Pack of 10
  • CAP FOR GLASS BEAKER 1000ML

    Lid for glass beaker 1000ml. Glass beaker 600ml. Ideal for use with the RM01 & RMGO! plating kits. Beaker available to purchase separately TOOLSPS055.
  • CAP FOR GLASS BEAKER 600ML

    Cap for glass beaker 600ml. Ideal for use with the RM01 & RMGO! plating kits. Beaker available to purchase separately TOOLSPS056.
  • PEN PLATER CROCODILE CLIP

    Crocodile Clip for workholding when pen plating.

26 Item(s)

per page