•     Over 250 years of quality service

  •     Freepost on orders over £100

  •     Traditional Values, 21st Century Service

Busch Burrs

28 Item(s)

per page

  • Busch Ball Burr

    The Busch Ball Burr is designed to shape, give a pattern or grind away when used with a pendant drill. The ball burr being one of the most popularly used in stone setting and is particularly suitable for diamond setting. Each burr is made from steel on a 2.34mm shaft.
  • Busch Bud Burr

    Bud Burr, use in conjunction with a pendant drill, hobby drill or micromotor to cut, grind away, shape or give pattern to a surface. 2.34mm shaft made from steel.
  • Busch Flame Burr

    This range of Flame Burrs are manufactured in high quality tool steel by Busch, giving a precision cut and long working life. Maximum diameter of the flame ranges from 0.9 mm - 2.3 mm Mounted on a 2.34 mm shaft to fit Foredom, Milbro drills and Micromotors. As with all Burrs and cutting tools, we recommend the use of a light lubricating oil or Silicone lubricant to prevent overheating and maintain sharpness of the burr during use.
  • Busch Stone Setting Burr

    Tapered Swiss Stone Setting Burr. Use in conjunction with a pendant drill, hobby drill or micromotor to cut, grind, shape or give pattern to a surface. The quantity of material removed depends on the pressure used. This steel tapered burr is designed to cut the seat or flush set stones. Burr on a 2.34mm shaft
  • Busch Inverted Cone Profile Drill

    This range of Inverted Cone Burrs are manufactured in high quality tool steel by Busch, giving a precision cut and long working life. Maximum size of the cone ranges from 0.6 mm - 2.3 mm Mounted on a 2.34 mm shaft to fit Foredom, Milbro drills and Micromotors As with all Burrs and cutting tools, we recommend the use of a light lubricating oil or Silicone lubricant to prevent overheating and maintain sharpness of the burr during use.
  • Busch Wheel Burr

    Wheel Burrs can be used with a pendant drill or micromotor to cut, grind and shape. Burr on a 2.34mm shaft Made from steel
  • Busch Cone Burr

    Cone Burrs can be used with a pendant drill or micromotor to cut, grind and shape. Burr on a 2.34mm shaft Made from steel
  • Busch Cylinder Shaped Burr (Fraizer)

    This range of Cylinder Burrs are manufactured in High quality tool Steel by Busch, giving a precision cut and long working life. The design of this plain Cylinder bur aids the removal of swarf whilst maintaining accuracy of cut to provide a smooth finish. Maximum size or the Cylinder ranges from 0.7 mm - 3.1 mm Mounted on a 2.34 mm shaft to fit Foredom, Milbro drills and Micromotors As with all Burs and cutting tools, we recommend the use of a light lubricating oil or Silicone lubricant to prevent overheating and maintain sharpness of the burr during use.
  • Busch Long Cone (Tapered Cylinder) Burr

    This range of Tapered Cylinder burrs are manufactured in High quality tool Steel by Busch, giving a precision cut and long working life. The design of this Tapered Cylinder burr aids the removal of swarf whilst maintaining accuracy of cut to provide a smooth finish - ideal for reaming out deeper drill holes without increasing the diameter. Maximum size or the Cylinder ranges from 0.7 mm - 3.1 mm Mounted on a 2.34 mm shaft to fit Foredom, Milbro drills and Micromotors. As with all Burrs and cutting tools, we recommend the use of a light lubricating oil or Silicone lubricant to prevent overheating and maintain sharpness of the burr during use.
  • Busch Parallel Cut Cylinder Burr

    This range of Parallel Cylinder Burrs are manufactured in High quality tool Steel by Busch, giving a precision cut and long working life. The Cut Cylinder has a fast cut action which is ideal for rough cutting profiles and removal of swarf. Diameter of the Cylinder ranges from 0.6 mm - 3.1 mm Mounted on a 2.34 mm shaft to fit Foredom, Milbro drills and Micromotors As with all Burrs and cutting tools, we recommend the use of a light lubricating oil or Silicone lubricant to prevent overheating and maintain sharpness of the bur during use.
  • Busch Cup Burr (Fraizer)

    Burr on a 2.34mm shaft Made from steel
  • Busch Twin Cut Cup Burr

    This range of Twin Cut Cup Setting Burrs are manufactured in High quality tool Steel by Busch, giving a precision cut and long working life. The Twin Cut Cup bur is fast cutting and aids the removal of swarf whilst maintaining accuracy of cut to provide a smooth finish to claws, pegs and setting grains. Internal size of the twin Cut Cup burr ranges from 0.8 mm - 2.3 mm Mounted on a 2.34 mm shaft to fit Foredom, Milbro drills and Micromotors As with all Burrs and cutting tools, we recommend the use of a light lubricating oil or Silicone lubricant to prevent overheating and maintain sharpness of the burr during use.
  • Busch Fast Cut Cup Burr

    This range of Clean Cut Cup Setting Burrs are manufactured in High quality tool Steel by Busch, giving a precision cut and long working life. The Clean Cut Cup burr is fast cutting and aids the removal of swarf whilst maintaining accuracy of cut to provide a smooth finish to claws, pegs and setting grains. Internal size of the Clean Cut Cup Burr is available in 1.2, 1.4 & 1.8 mm. Mounted on a 2.34 mm shaft to fit Foredom, Milbro drills and Micromotors. As with all Burrs and cutting tools, we recommend the use of a light lubricating oil or Silicone lubricant to prevent overheating and maintain sharpness of the burr during use.
  • Busch Clean Cut Cup Burr

    This range of Clean Cut Cup Setting Burrs are manufactured in High quality tool Steel by Busch, giving a precision cut and long working life. The Clean Cut Cup burr is fast cutting and aids the removal of swarf whilst maintaining accuracy of cut to provide a smooth finish to claws, pegs and setting grains. Internal size of the Clean Cut Cup Burr is available in 1.2, 1.4 & 1.8 mm Mounted on a 2.34 mm shaft to fit Foredom, Milbro drills and Micromotors As with all Burrs and cutting tools, we recommend the use of a light lubricating oil or Silicone lubricant to prevent overheating and maintain sharpness of the burr during use.
  • Busch Wide Wheel Shaped Burr

    Wheel burrs are used with a pendant drill, hobby drill or micromotor in order to cut, grind, shape or give pattern to a surface. Similar to cylindrical burrs, but with a lower profile. They also have teeth on the top surface of the working part. Burr on a 2.34mm shaft Made from steel
  • Busch Mounted Saw Burr

    The Busch Mounted Saw Burr has a flat cutter/circular saw profile measuring 10.0mm in diameter. This saw can be used with a pendant drill or micromotor in order to cut, grind or shape.
  • Busch Bearing Cutter Burr 90°

    Bearing cutter burrs are used for cutting seats in prongs for channel and flush settings, and also for scoring or cutting lines. On a 2.34mm shaft. Made from steel
  • Busch Bearing Cutter Burr 70°

    This range of 70 Degree Bearing Cutters are manufactured in High quality tool Steel by Busch, giving a precision cut and long working life. This Bearing Cutter profile is useful for opening settings and bearings for round stones. Bearing Cutter sizes ranges from 0.9 mm - 5.0 mm Mounted on a 2.34 mm shaft to fit Foredom, Milbro drills and Micromotors As with all Burrs and cutting tools, we recommend the use of a light lubricating oil or Silicone lubricant to prevent overheating and maintain sharpness of the burr during use.
  • Busch Mounted Domed Saw Burr

    The Busch Mounted Saw Burr has a flat cutter/circular saw profile measuring 10.0mm in diameter. This saw can be used with a pendant drill or micromotor in order to cut, grind or shape. This burr has a cutting edge measuring 0.40mm.
  • Busch Tapered Bud Burr

    This range of Bud Burrs are manufactured in High quality tool Steel by Busch, giving a precision cut and long working life. This versatile burr profile is useful for opening settings and bearings for large stones - also useful for sculpting metal and casting wax - the hollow point helps prevent the cutter from clogging and overheating. Maximum Diameter or the Bud ranges from 5.0 mm - 8.0 mm Mounted on a 2.34 mm shaft to fit Foredom, Milbro drills and Micromotors As with all Burrs and cutting tools, we recommend the use of a light lubricating oil or Silicone lubricant to prevent overheating and maintain sharpness of the burr during use.
  • Busch Large Bud Burr

    This range of Bud Burrs are manufactured in High quality tool Steel by Busch, giving a precision cut and long working life. This versatile burr profile is useful for opening settings and bearings for large stones - also useful for sculpting metal and casting wax - the hollow point helps prevent the cutter from clogging and overheating. Maximum Diameter or the Bud ranges from 6.0 mm - 8.0 mm. Mounted on a 2.34 mm shaft to fit Foredom, Milbro drills and Micromotors. As with all Burrs and cutting tools, we recommend the use of a light lubricating oil or Silicone lubricant to prevent overheating and maintain sharpness of the burr during use.
  • Busch Thin Tapered Bud Burr

    Busch Thin Tapered Bud Burr on a 2.35mm Steel Shaft. The Tapered Bud Burr is popular with Jewellers and Hobbyists alike, and has many applications including cutting, grinding and shaping.
  • Busch Cross Cut Ball Burr

    Cross Cut Busch Ball Burr on a 2.35mm Steel Shaft. The Busch Cross Cut Ball Burr is popular with Jewellers and Hobbyists alike, the Cross Cut Teeth are ideal for removing a large amount of metal.
  • Large Cross Cut Oval Burr

    These Large Cross Cut Burrs are manufactured in High quality tool Steel by Busch, giving a precision cut and long working life. This versatile burr profile is useful for opening settings and bearings for large stones - also useful for sculpting metal and casting wax Maximum Diameter or the Large Cross Cut Burr is available in 5.0. 6.0, & 8.0 mm Mounted on a 2.34 mm shaft to fit Foredom, Milbro drills and Micromotors As with all Burrs and cutting tools, we recommend the use of a light lubricating oil or Silicone lubricant to prevent overheating and maintain sharpness of the burr during use.
  • Busch Large Cut Cylinder Burr

    These Large Cut Cylinder Burrs are manufactured in High quality tool Steel by Busch, giving a precision cut and long working life. This versatile burr profile is useful for opening settings and bearings for large stones - also useful for sculpting metal and casting wax - the hollow point helps prevent the cutter from clogging and overheating. Maximum Diameter of the Large Cut Cylinder Burr ranges from 5.0 mm - 8.0 mm Mounted on a 2.34 mm shaft to fit Foredom, Milbro drills and Micromotors As with all Burrs and cutting tools, we recommend the use of a light lubricating oil or Silicone lubricant to prevent overheating and maintain sharpness of the burr during use.
  • Busch H.S.S Twist Burr Drill

    H.S.S. Busch Jewellery Drill Bit is an industry standard that lasts that bit longer, with a 2.35mm shank. This allows the user, be it jeweller or hobbyist, easy changing between the sizes of drills and burrs whilst using your pendant drill or micromotor. Diameter: 0.5mm-1.6mm.
  • Busch Ball Diamond Burr Drill

    A Diamond Burr on a steel shank with a shaped head which has a coating of Industrial-Grade diamond powder. For grinding glass and other hard materials such as stones. They are used with water as a lubricant which also keeps the dust in the solution. The Burr should be dipped into water at regular intervals to keep the surface lubricated. Burr on a 2.35mm shank
  • Busch Ball Tungsten Carbide Drill

    Both durable and powerful and are ideally suited for use with hard jewellery metals such as platinum, titanium and white gold. They give accuracy, durability and give superior cutting power to increase profits and make your work more cost effective. The shaft is 2.35mm in diameter.

28 Item(s)

per page