•     Over 250 years of quality service

  •     Freepost on orders over £100

  •     Traditional Values, 21st Century Service

Pepe

7 Item(s)

per page

  • Bench Guillotine

    Pepe Tools 100mm/4 inch Bench Guillotine. This high quality unit has superior cutting power and the blade is designed to cut 10,000 times before sharpening may be required. This guillotine is compact enough to fit onto your bench; supplied with mounting holes so the guillotine can be securely mounted to the bench. Complete with a squared guide, adjustable ruler with cutting guide and a material locking bar. Pepe guillotine is designed to shear up to 0.81mm/ 20 gauge for gold, silver and copper. Maximum cut width is 100mm. The Pepetools unit unique design allows it to be operated from standing on the side and not on the front side of the guillotine. This has been designed in this manner simply with the thought of the safety for the operator. Once all measurements have been made, slide the material into the cutting surface and pull cutting blade handle down. This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • Foredom Flex Shaft Motor Kit With Pepe Jump Ring Maker Kit

    Combined Kit from FOREDOM & PEPE Tools featuring Foredom’s most popular Series SR Motor; 1/6hp 18,000 rpm motor with forward & reverse, Variable speed foot control and Foredom’s most popular H.30 Quick Release Handpiece ideal for general purpose for use with 2.35mm shank burrs. This is combined with the Pepe Tools Jump Ring Maker designed for use with the Foredom H.30 Handpiece. The maker is supplied with 20 mandrels from 2.5mm – 12mm in 0.5 mm increments. Simply fit the chosen mandrel into the keyless chuck and coil your wire onto the mandrel by turning the handle to create the desired quantity of jump rings. Remove the coil from the mandrel and place it onto the coil holder. Attach the sawblade holder to a Foredom No. 30 hand piece and then safely cut your coil into jump rings with the rotary saw blade. To preserve the life of your sawblade where you have drawn your own wire, we recommend that the wire is annealed before coiling. Powder coated black aluminium base. Includes PepeLube and Blade. Do not use with Stainless Steel. Made in U.S.A. FREE Accessory kit with rotating burr stand also included: 43 Piece Accessory Kit includes; assortment of metal working accessories including various shapes, sizes and grits of Satin Finishers, Bristle and Brass Cup, Wheel & End Brushes, Scotch-Brite, Radial Bristle Discs, High Speed Steel Fluted Engraving Burs, Rubber Bonded Abrasive Wheel and Disc, Purple Ceramic Sanding Bands, Screw and Rubber Drum Mandrels, V Stone and Unitized Points, and Platinum White Polishing Compound and 1 x Rotating Burr Holder.
  • Pepe Premium Disc Cutter

    This disc cutter has a space saving design and comes with £50 worth of FREE accessories including Pepe red urethane pad, Pepelube and Centre positioning dies. This is the NEW & IMPROVED version of the world’s bestselling disc cutter. Precision machined from hardened steel, each plate is ground to perfection and built to last a lifetime. Punch clearing design - allows the punch to completely clear the die. Punches with 7º cutting angles - applies a shearing action that reduces cutting stresses and produces much cleaner cut-outs in silver up to 1mm. Material hold down feature - Restricting the movement of the material being cut, by firmly holding it in place. The easy open & close height adjusting knob, is low profile and will not interfere with your work, when using hammer, mallet or hydraulic press. Organising base - Machined from aluminium and powder coated to maintain a durable finish. Laser engraved for easy punch identification. Sizes are laser engraved on the disc cutter in inches & mm (Metric: 3mm, 4.75mm, 6.35mm, 8mm, 9.5mm, 11mm, 12.7mm, 14.3mm, 16mm, 17mm, 19mm, 20.6mm, 22mm & 25mm).
  • Superior Ring Bending Tool

    A superior ring bending tool from Pepe Tools made in the USA. This Ring Bending Tool is strong, versatile and has been re-designed. It will even make spoon rings. The precision matching posts and dies are machined from solid steel and then hardened. After hardening, each steel post and die is nickel plated to prevent from a lifetime of corrosion. There are seven different pistons which are driven against the chosen die. Five of the seven dies are round in varied diameters; 12, 14, 16, 20 and 22mm, also included is 60º & 90 º angle dies. When using the ring bending tool use with fully annealed metal less than 1mm in thickness. Made from steel. Lightly oil moving parts if required. Presented in a handy Precision Organising Base This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • Pepe Jump Ring Maker

    Pepe Tools have redesigned their best-selling Jump Ring Maker. The maker is supplied with 20 mandrels from 2.5mm - 12.00mm in 0.5mm increments. Simply fit the chosen mandrel into the keyless chuck and coil your wire onto the mandrel by turning the handle to create the desired quantity of jump rings. Remove the coil from the mandrel and place it onto the coil holder. Attach the sawblade holder to a Foredom No. 30 hand piece and then safely cut your coil into jump rings with the rotary saw blade. To preserve the life of your sawblade where you have drawn your own wire, we recommend that the wire is annealed before coiling. Powder coated black aluminium base Includes: PepeLube and Blade Do not use with Stainless Steel Made in U.S.A This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • Large Saw Blade for Jump Ring Maker

    Large replacement circular saw blade for Pepe Jump ring maker, 1.5" x .008".
  • Saw Blade for Jump Ring Maker

    Smaller replacement circular saw blade for the Pepe Jump ring maker. 1.25" x .008".

7 Item(s)

per page