•     Over 250 years of quality service

  •     Freepost on orders over £100

  •     Traditional Values, 21st Century Service

Jentner

17 Item(s)

per page

  • JENTNER DIGITAL II PLATING UNIT ONLY

    Professional Digital Plating Unit with 3 x 1.5 litre tanks - one for degreasing and two for plating, plus three holding or rinsing tanks. Agitation can be switched on (recommended for hard gold plating). The digital display panel shows temperature, countdown, volts and amps. There are pre-set programmes for most plating operations and you can configure and save your own preferences. The Digital II monitors fluctuations in the current (amps) and adjusts the plating time to compensate, thus ensuring that plating thickness is uniform. This unit allows process parameters to be replicated correctly every time and the unit will terminate the job on completion, allowing you to concentrate on other work or deal with distractions without having to constantly monitor the plating process. Once users learn to calculate the precious metal content of the solutions in ampere/minutes the Digital II can monitor and display the rate of depletion of precious metals in each tank. Includes a pen plating connector. Dimensions: 500(w) x 320 (d) x 250(h)mm Weight: 16kg Bath Dimensions: 150 x 100 x 150mm Price shown is the basic cost which includes tanks and temperature/level sensor, but you will need to select appropriate anodes, jigs and if necessary a heater and its fixing clip. You can select the accessories you require for the Digital II from the following list. For degreasing and gold plating you will need a stainless steel anode TOOLSPS063 (we recommend two for each tank) For rhodium plating you will need two mixed oxide anodes TOOLSPS064 For gold plating you will need a heated solution, so add immersion heater TOOLSPS067 and its optional mounting clip TOOLSPS67C UK’s Official Jentner Distributor 12 Month Warranty
  • Jentner RMGO! Kit 1 for Rhodium Plating

    Introducing the new Jentner RMGO! speed plating kits for degreasing, rhodium and cold gold plating. The pre-set processing times and voltages allows a quick and professional finish. The time intervals can be selected between 15, 30 or 60 seconds. This guarantees a reliable calculation with an automatic power shut off after the selected time resulting in an optimal finish and no wasted precious metal. Choose time and press GO! Made in Germany. Advantages: Rhodium savings due to pre-set deposition time - A deposit time of 36 seconds instead of 30 seconds will cost you 20% more of your expensive rhodium. This is a cost savings of 0.2 g of rhodium at 1000 rings when coated exactly 30 seconds. Absolutely safe process as the voltage does not have to be adjusted. Simple and user friendly with one GO! Button. Plate more than 1000 rings with 1 litre of rhodium solution JE88 resulting in a brilliant and glossy surface. The solutions are available as concentrates or ready to use baths. Small and easy to store. Ready to GO! RMGO! Kit for Rhodium Plating. This Kit includes: 1 x RMGO! Unit 2 x Beaker 1000ml incl. lid 2 x Beaker 600ml incl. lid 2 x red Cable 1 x black Cable with crocodile clip 1 x Stainless steel anode 1 x Mixed oxide anode 1 x Jig with 4 hooks Solutions and degreasing salts sold separately. Choose your preferred ready to use bath or concentrate solution: UK's Official Jentner Distributor 12 Month Warranty
  • Jentner RMGO! Kit 2 for Rhodium and Cold Gold Plating

    ntroducing the new Jentner RMGO! speed plating kits for degreasing, rhodium and cold gold plating. The pre-set processing times and voltages allows a quick and professional finish. The time intervals can be selected between 15, 30 or 60 seconds. This guarantees a reliable calculation with an automatic power shut off after the selected time resulting in an optimal finish and no wasted precious metal. Choose time and press GO! Made in Germany. Advantages: Rhodium savings due to pre-set deposition time - A deposit time of 36 seconds instead of 30 seconds will cost you 20% more of your expensive rhodium. This is a cost savings of 0.2 g of rhodium at 1000 rings when coated exactly 30 seconds. Absolutely safe process as the voltage does not have to be adjusted. Simple and user friendly with one GO! Button. Plate more than 1000 rings with 1 litre of rhodium solution JE88 resulting in a brilliant and glossy surface. The solutions are available as concentrates or ready to use baths. Small and easy to store. Ready to GO! RMGO! Kit for Rhodium and Cold Gold Plating. This kit includes: 1 x RMGO! Unit 3 x Beaker 1000ml incl. Lid 3 x Beaker 600ml incl. Lid 3 x red Cable 1 x black Cable with crocodile clip 2 x Stainless steel anode 1 x Mixed oxide anode 1 x Jig with 4 hooks Solutions and degreasing salts sold separately. Choose your preferred ready to use bath or concentrate solution: UK's Official Jentner Distributor 12 Month Warranty
  • Jentner RMGO! Kit 3 for Cold Gold Plating

    Introducing the new Jentner RMGO! speed plating kits for degreasing, rhodium and cold gold plating. The pre-set processing times and voltages allows a quick and professional finish. The time intervals can be selected between 15, 30 or 60 seconds. This guarantees a reliable calculation with an automatic power shut off after the selected time resulting in an optimal finish and no wasted precious metal. Choose time and press GO! Made in Germany. Advantages: Rhodium savings due to pre-set deposition time - A deposit time of 36 seconds instead of 30 seconds will cost you 20% more of your expensive rhodium. This is a cost savings of 0.2 g of rhodium at 1000 rings when coated exactly 30 seconds. Absolutely safe process as the voltage does not have to be adjusted. Simple and user friendly with one GO! Button. Plate more than 1000 rings with 1 litre of rhodium solution JE88 resulting in a brilliant and glossy surface. The solutions are available as concentrates or ready to use baths. Small and easy to store. Ready to GO! RMGO! Kit for Cold Gold Plating. This Kit includes: 1 x RMGO! Unit 2 x Beaker 1000ml incl. lid 2 x Beaker 600ml incl. lid 2 x red Cable 1 x black Cable with crocodile clip 2 x Stainless steel anode 1 x Jig with 4 hooks Solutions and degreasing salts sold separately. Choose your preferred ready to use bath or concentrate solution: UK's Official Jentner Distributor 12 Month Warranty
  • JENTNER RM01 KIT1 FOR RHODIUM PLATING

    This is the complete system for Rhodium Plating at room temperature, made by German electroplating experts Jentner. It contains a one-touch plating system unit, glass beakers & lids, stainless steel anode for degreasing and one mixed oxide anode for rhodium plating plus cables and jig with four hooks. The voltage is fixed at the optimum for rhodium plating, so the only control necessary is the on/off switch. No waiting for the solutions to heat up and no fumes from hot solutions. The lipped glass beakers allow the solutions to be immediately put back into their containers for safety and convenience. The circular anodes fit snugly to the sides of the beakers allowing maximum space and a uniform plating thickness. Supplied with 100g of degreasing salts and 1x JE88 Rhodium concentrate 100mm/2g Rh. Dimensions: 200(l) x200(d) x300(h) mm Weight: 7kg UK’s Official Jentner Distributor 12 Month Warranty
  • Jentner Gold & Rhodium Plating System

    This is the complete cold plating system for gilding and rhodium plating at room temperature, made by German electroplating experts Jentner. Kit contains RM01 one touch plating system unit, glass beakers and lids, two stainless steel anodes (one for degreasing and one for gilding) and one mixed oxide anode (for rhodium plating), plus cables and jig with four hooks. The voltage is fixed at the optimum for gilding and rhodium, so the only control necessary is the on/off switch. No waiting for the solutions to heat up and no fumes from hot solutions. The lipped glass beakers allow the solutions to be immediately put back into their containers for safety and convenience. The circular anodes fit snugly to the sides of the beakers allowing maximum space and a uniform plating thickness. Supplied with: Degreasing salts 1 x litre of ready mixed cold gold plating solution 1 rhodium concentrate JE88 100ml/2g Rh Dimensions: 200(l) x200(d) x300(h) mm Weight: 8kg UK’s Official Jentner Distributor 12 Month Warranty
  • JENTNER RM01 KIT3 FOR COLD FOR GOLD PLATING

    This is the complete cold gold plating system for gilding at room temperature, made by German electroplating experts Jentner. Kit contains RM01 one touch plating system unit, glass beakers and lids, two stainless steel anodes (one for degreasing and one for gilding) plus cables, clamp and jig with four hooks. The voltage is fixed at the optimum for gilding, so the only control necessary is the on/off switch. No waiting for the solutions to heat up and no fumes from hot solutions. The lipped glass beakers allow the solutions to be immediately put back into their containers for safety and convenience. The circular anodes fit snugly to the sides of the beakers allowing maximum space and a uniform plating thickness. Supplied with 100g of degreasing salts and 1 x litre of ready mixed cold gold plating solution. This system can be upgraded at a later stage to add rhodium plating with the purchase of a mixed oxide anode and additional beakers and leads. Dimensions: 200(l) x200(d) x300(h) mm Weight: 7kg UK’s Official Jentner Distributor 12 Month Warranty
  • Oxiprotect Anti-Tarnish Jentner 5 Litre

    OXIPROTECT is a protection system for silver surfaces and low alloyed precious metals e.g. red gold. It protects effectively against tarnish, oxidation and discolouration by applying an invisible layer which protects against chemical reactions, dirt and water repellent and improves the scratch resistance of the surface without affecting its lustre. Biologically harmless it is applied by immersion at between 45-60°C for 5 minutes with gentle agitation. We suggest using it in your heated ultrasonic cleaner (without the ultrasound being activated). 5 Litre This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • JENTNER IMMERSION HEATER 200W

    Transferable heater enabling the user to select the tank to be heated. Thermostatically controlled by the control panel. Requires titanium bracket (PSC67 to hook onto side of tank).
  • JENTNER JIG FOR RINGS 24 HOOKS

    Jig with 24 hooks for rings, 160 x 100mm, suitable for Comfort V and Digital V plating units.
  • Oxiprotect Anti-Tarnish Jentner 1 Litre

    OXIPROTECT is a protection system for silver surfaces and low alloyed precious metals e.g. red gold. It protects effectively against tarnish, oxidation and discolouration by applying an invisible layer which protects against chemical reactions, dirt and water repellent and improves the scratch resistance of the surface without affecting its lustre. OXIPROTECT is biological harmless is applied by immersion at between 45-60°C for 5 minutes with gentle agitation. We suggest using it in your heated ultrasonic cleaner (without the ultrasound being activated). 1 Litre This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • Oxi-Ex Tarnish Removal Jentner 1 Litre

    OxiEx is a water-based agent which removes tarnish and oxidation layers from silver and certain gold alloys. Simply put the ready to use solution into a glass or plastic tank or beaker and dip the goods at a temperature of 20-30°C or until the tarnish is removed - normally 1 - 30 minutes depending on the level of discolouration. 1 Litre This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • GLASS BEAKER 1000ML

    Glass beaker 1000ml. Ideal for use with the RM01 & RMGO! plating kits. Lid available to purchase separately TOOLSPS5CP Also available in 600ml TOOLSPS056.
  • Oxi-Ex Tarnish Removal Jentner 250ml

    Oxi-Ex is a water-based de-oxidation agent which is used to remove sulphide and oxide layers from silver and gold. Oxi-Ex can be used for both decorative and technical applications. The solution is ready to use. This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • CAP FOR GLASS BEAKER 600ML

    Cap for glass beaker 600ml. Ideal for use with the RM01 & RMGO! plating kits. Beaker available to purchase separately TOOLSPS056.
  • CAP FOR GLASS BEAKER 1000ML

    Lid for glass beaker 1000ml. Glass beaker 600ml. Ideal for use with the RM01 & RMGO! plating kits. Beaker available to purchase separately TOOLSPS055.

17 Item(s)

per page