•     Over 250 years of quality service

  •     Freepost on orders over £100

  •     Traditional Values, 21st Century Service

Foredom

Items 1 to 30 of 44 total

per page

Page:
  1. 1
  2. 2
  • SR Series Motor Kit

    The Foredom SR Pendant Motor; Foredom's most popular and best motor for general use. Complete with: SR Pendant Motor; Forward & reverse 1/6 hp 18,000 RPM motor Foredom quick release cable Type 20 Quick release interchangeable handpiece for use with 2.35mm burrs. Variable foot control FREE 43 piece accessory kit with rotating burr stand. Includes: 1 x Rotating Burr Holder 1 x Platinum Bar 6 x Radical Discs 3 x Purple Ceramic Sanding Bands 60 grit 3 x Purple Ceramic Sanding Bands 80 grit 3 x Purple Ceramic Sanding Bands 120 grit 3 x Purple Ceramic Sanding Bands 220 grit 1 x Satin Finish Scotchbrite, Fine, mounted 1 x Satin Finish Scotchbrite, Coarse, mounted 1 x Rubber Bonded Abrasive wheel, Brown 60 grit 1 x Rubber Bounded Abrasive wheel, Black 120 grit 1 x Rubber Bounded Abrasive wheel, Green 180 grit 3 x CW Polishing Wheels 1 x CUT-OFF Disc 1 x Felt Buff, Unmounted 2 x Mandrels 5 x Mounted Brushes 4 x High Speed Vanadium Steel Fluted Engraving Burrs 1 x Rubber Sanding Drill Mandrel 1 x V Stone point Cylinder This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • Motor Kit with type 30 hand piece

    Including Foredom SR Series Pendant Motor, Type 30 Handpiece + Accessories. Complete pendant drill package includes: SR Series Motor; 1/6hp 18,000 rpm motor with forward & reverse Type 30 quick release handpiece, for use with 2.35mm shank burrs Variable speed foot control Designed to fit the TOOLSW099 - Pepe Jump Ring Maker FREE Accessory kit with rotating burr stand: 43 Piece Accessory Kit includes; assortment of metal working accessories including various shapes, sizes and grits of Satin Finishers, Bristle and Brass Cup, Wheel & End Brushes, Scotch-Brite, Radial Bristle Discs, High Speed Steel Fluted Engraving Burs, Rubber Bonded Abrasive Wheel and Disc, Purple Ceramic Sanding Bands, Screw and Rubber Drum Mandrels, V Stone and Unitized Points, and Platinum White Polishing Compound and 1 x Rotating Burr Holder. This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • MAINTENANCE KIT FOR FOREDOM SR MOTOR

    The Foredom complete maintenance kit for Foredom SR pendant motors. Includes replacement inner cable, carbon brushes, grease and instructions.
  • FOREDOM LX SERIES MOTOR

    The LX is Foredom's most powerful pendant motor, delivering high power from start-up to its maximum speed of 5,000 rpm. It's perfect for low-speed work such as stone setting, where speeds higher than 5,000 rpm can damage the mechanism of hammer action handpieces. Please note - This pendant motor is supplied without a handpiece. Foredom warrants the Series LX Motor to be free of defects in material or workmanship for a period of 2 years after purchase. This warranty does not cover damage caused in transit or by accident, misuse, or ordinary wear of shafts, sheaths, bearings, armature, and motor brushes. Shafts, sheaths and duplex springs are not covered by this warranty since they are especially sensitive to the pressure and stress variables of the individual operator. For full warranty details refer to the product manual. TOOL TIP: The hammer action handpiece is designed to work with the slower LX model of the Foredom pendant drills due to the fact it has a high torque and a lower speed of 5,000 rpm, this allows the hammer action to be controlled better. As well as the handpiece is not designed to be operated at the high speed. If you would like to use your original drill please take care not to run the drill on full to prevent any damaged caused to the handpiece and your work. As the hammer action hand piece works on a knocking action the tips are not the same as the burrs and drills, they have a screw tread which tightens the tip into the collet. This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • Foredom Pendant Drill Stand

    The Foredom Pendant Drill Stand clamps onto any bench or worktop. With handpiece holder to keep your pendant drill tidy when not in use. This item will have to be sent via UK Mail Hazardous Materials & Liquids Only.
  • FOREDOM DUAL PENDANT DRILL - STAND BENCH/WALL FITTING

    New versatile design - screws to either the workbench side rail of bench or wall. With handpiece holder to keep your pendant drill tidy when not in use. This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • FOREDOM FOOT CONTROL

    Replacment foot control for Foredom pendant drills.
  • FOREDOM TYPE 15 HAMMER ACTION HANDPIECE

    FITS FOREDOM MOTORS ONLY. This Hammer Type 15 Slip Joint Handpiece has a hammering rather than rotary action for use at low speed (0-5,000 rpm) by jewellers for stone setting and decorative work.
  • FOREDOM TYPE 15 HAMMER ACTION HANDPIECE

    Ideal for stone-setting, engraving and texturing, complete with shapeable tip and impact control. Recommended for use with the LX Foredom Motor. TOOL TIP: The hammer action handpiece is designed to work with the slower LX model of the Foredom pendant drills due to the fact it has a high torque and a lower speed of 5,000 rpm, this allows the hammer action to be controlled better. As well as the handpiece is not designed to be operated at the high speed. If you would like to use your original drill please take care not to run the drill on full to prevent any damaged caused to the handpiece and your work. As the hammer action hand piece works on a knocking action the tips are not the same as the burrs and drills, they have a screw tread which tightens the tip into the collet.
  • H.18 QUICK RELEASE FOREDOM HANDPIECE

    Slimline quick release with lever action handpiece with Foredom fitting. Press lever down to release collet. For use with 2.35mm shank burrs.
  • Foredom No.18 Quick Release Slipjoint Handpiece

    Has super slim grip and lever action for exclusive use with 2.35mm shank burrs. Fits all European style motors including Seco & Milbro. Simply depress the lever and the bur releases in seconds.
  • Type 20 Standard Quick Change

    Quick release handpiece with Foredom fitting. Push lever to left or right to release the collet to change accessories. Use exclusively with 2.35mm shank burrs.
  • FOREDOM TYPE 20 QUICK RELEASE HASLIPJOINT HANDPIECE

    For European Slip-Joint Fitting Motors only. A larger diameter quick-release hand piece. Simply flick the lever to release your tools to use with 2.35mm shank burrs. It has a moulded plastic front grip with tapered sides for easy and close handling.
  • FOREDOM TYPE 30 HANDPIECE SLIP JOINT

    Type 30 Handpiece Slip Join; tFeatures a 3-Jaw chuck adjustable from 0-4mm. Complete with chuck key.
  • FOREDOM TYPE 30 HANDPIECE

    The Foredom Type 30 Handpiece features a 3-Jaw chuck adjustable from 0-4mm. Complete with chuck key. This general handpiece benefits from lubicated ball bearings that do not require additional lubrication.
  • FOREDOM K1030 PORTABLE MICROMOTOR

    A fully functioning portable micromotor. The control unit includes a built in rechargeable battery unit. You can plug it in or use the battery which has a life of up to 5 hours. The unit features a digital RPM display at the top which makes it easy to monitor the speed as you work up to 30,000rpm. This kit is perfect for users who work at multiple stations or where power may be an issue. The handpiece is lightweight but durable and ideal for polishing and fine details. The handpiece has a twist release rotary type collet for easy changes of 2.35mm. Its fan cooled, brush type continuous duty motor runs cool and vibration-free. It has permanently lubricated, shielded ball bearings that require no additional lubrication. This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • FOREDOM K1070 QUICK RELEASE MICROMOTOR

    A high speed rotary micromotor with 2.35mm collet and speeds up to 38,000 rpm, ideal for precise, high speed work. The handpiece has a slender, contoured grip for precise, high speed work and a quick release chuck. Handpiece weighs just 208 grams with lightweight coiled cable for excellent flexibility. The fan cooled brush type continuous duty motor, runs cool and vibration free, with permanently lubricated, shielded bearings. Kit complete with control box, variable speed foot control, quick release handpiece plus handpiece rest, spare fuse and motor brushes. Control box has on/off switch, forward/reverse and manual/foot controls Compared to flexible shaft machines, micromotors have less torque, however, their higher speed results in a comparable rate of material removal with a lighter touch. The simple cord connection between the handpiece motor and control box is another key advantage. Micromotors offer much greater freedom of movement. This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • FOREDOM K1020 HIGH TORQUE MICROMOTOR

    The K1020 High Torque Micromotor has extra power/torque that makes it great for deburring cast pieces, polishing, taking down weld seams, moderate to heavy grinding and rapid metal removal. If you need high speed (up to 20,000 rpm) greater manoeuvrability than a flex shaft but still need the power to tackle heavy work, then this is for you. The 3 jaw chuck accepts shanks up to 4mm. Control Unit has switches for On/Off Power, Forward/Reverse Rotation, and Manual/Foot Speed Control selection. Overload Protection turns on a red light and sounds a beeping alarm if the motor ever stalls. The Control Box Back has a voltage selector switch that lets you choose from 110/120 or 220/240 volt and receptacles for the Variable Speed Foot Control or Optional On/Off Foot Switch. This is the same control unit that comes in the Micromotor Kit K.1070 TOOLSPD070. Micro Grinder Handpiece has a geared 3-jaw chuck that takes any size rotary accessory or drill bit with shanks up to 4mm diameter. Length= 205.8mm, Weight= 510 grams, Diameter= 26mm at chuck end. This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • Foredom Drill Press

    Precision drill presstakes Foredom No. 30 handpiece (PD075 & PD075/SJ) only.
  • FOREDOM POLISHING MOTOR WITH HOODS

    A great little motor with variable speed control from 500 to 7000 rpm. Especially useful when polishing enamels, glass and plastics. It features a 1/6 HP high torque, permanent magnet motor that is extremely quiet and smooth running. Supplied with precision machined, tapered spindles for holding buffs and wheels up to 4" in diameter. Speed range from 500 to 7000 RPM 125 watts Motor shaft diameter 5/16", Height 5 1/8", width 13" between spindles Weight 7.5lbs CE rated Supplied with two dust collector hoods: Made of heavy gauge sheet metal construction with non-skid pads on the bottom. 64mm adapter that fits most dust collection system hoses. Measures 165mm h. x 219mm d.
  • FOREDOM POLISHING MOTOR WITHOUT HOODS

    Foredom Polishing Kit. A great little motor with variable speed control from 500-7000rpm especially useful when polishing enamels, glass and plastics. Supplied complete with spindles. Supplied without dust collection hoods.To buy this product with hoods, select product TOOLSPE284. Features: 1/6 hp high torque permanent magnet motor that is extremely quiet and smooth running Comes with precision machined,tapered spindles for holding buffs and wheels up to 4" in diameter. Speed Range: 500-7,000 rpm. 125 Watts Motor shaft diameter: 5/16". Height: 5-1/8". Width: 13" between spindles. Weight: 7.5 lbs CE Rated

  • FOREDOM DUST EXTRACTION UNIT

    Foredom Filter Hood designed for use at the jeweller's bench to collect dust and larger particles produced from light grinding and polishing. The CE Compliant Hood is made of powder coated, heavy gauge steel. It has a removable water-tight metal tray, clear polycarbonate shield, and goose neck LED light that is bright and long lasting. Three filters (2 polyester and one charcoal) come packed with the unit that are easy to change and send to a refiner. It can be moved anywhere on a bench top for use with a flexible shaft handpiece, micromotor, and other bench top tools. Despite its small size, the filter hood offers strong suction power for removing particles of hazardous dust and reclaiming precious metal. Please note that the Filter Hood is NOT to be used as a fume hood or for removal of soldering fumes. Made of powder coated heavy gauge steel. Has voltage selector switch for 110 or 220 Volt operation. Fan rating of 80 CFM. Measures 7-1/2" h, 6" wide and 12-3/4" d (190 h. x 153 w x 323mm d.) Weighs 9 lbs, ship weight is 10 lbs. This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
  • Foredom Dust Collector

    This compact dust extractor is perfect for any workshop or work space that creates harmful dust and debris. Simple to use and ideal for anyone concerned about working in a clean and safe environment, whilst collecting dust for refining Foredom’s new variable speed MADC20 Dust Collector is whisper quiet at 52dbA with powerful suction at 115 CFM. The cyclone with polycarbonate collection chamber pre-filters 99% of all debris and the HEPA filter eliminates 99.98% of debris up to 0.3micron. This quality-built single-station unit has castors for easy portability. It is simple to use, and basically maintenance free. It is an excellent companion to Foredom's MADCH-6 Fishmouth - TOOLSMADCH - However, it is also a stand alone unit for collecting dust from grinding, buffing and polishing metal, and many other materials. Use when working with dry materials ONLY.
  • Foredom Fishmouth with Bench Pin

    Foredom’s new Fishmouth & bench peg, with curved acrylic shield and adjustable arm rests is the perfect addition to any bench for dust control and debris removal. It mounts to any GRS style mounting bracket - TOOLSBE08F - Foredom's MA604 mounting bracket is also included in case you do not have a GRS bracket. The exhaust port accommodates a 2-1/4″ (56mm) hose and comes with an elbow to position your dust collector hose in any direction. The curved acrylic shield gives a clear view of your work and also helps to keep stray dust from flying at you especially when using rotary tools. The inside of the Fishmouth has a mounting bracket for the supplied Wooden bench peg. When used in conjunction with Foredom's Dust collector - TOOLSMADC2 - this provides an effective dust control system at the workbench.
  • set of 6 anvil points for foredom type 15 handpiece

    Designed for use with the Foredom Type 15 Handpiece H.15 TOOLSPD052 & H.15 SJ TOOLSPDS52 as well as Swiss Made Badeco Hammer Action Handpiece TOOLSPD081.

Items 1 to 30 of 44 total

per page

Page:
  1. 1
  2. 2